VR CH

Product introduction

■ ■ ■

Product system ·

G6290V Polymethacrylate viscosity improver

Product introduction

Product performance

It is recommended for blending low pour point hydraulic oil and shock absorber oil.

This product has multiple functions such as reducing pour point, increasing viscosity and raising viscosity index.

Product performance: It has a narrow molecular weight distribution range, excellent shear stability, and also possesses the capabilities of increasing viscosity and index. It has good low-temperature performance and anti-emulsification performance.

 

 

ProjectQuality standardTypical resultAnalytical method
Density(20℃)kg/m³Report910SH/T0604
Kinematic viscosity(100℃)/m㎡/s750-850820GB/T265
Chromaticity, number≤0.5<0.3GB/T6540
Thickening ability(m㎡/s)≥3.03.85GB/T265 note 1
Moisture%TracenoGB/T260
Mechanical impurities/mass fraction %≤0.050.03GB/T511
KRL(20L,60℃)Shear index≤3833NB/SH/T0845 note 2
KRL(20L,60℃)Shear drop rate %≤84NB/SH/T0845 note 3
Tilt point℃≤-36-45GB/T3535 note 4

 

Note 1: The difference between the 100℃ kinematic viscosity of HVIH5 base oil after adding 9.5% viscosity index agent and the 100℃ kinematic viscosity of the base oil is the thickening capacity.

Note 2: Measure the shear stability index of HVIH5 base oil after adding 9.5% viscosity index agent.

Note 3: After adding 5.2% viscosity index agent to the HVIH5 base oil, the viscosity decrease rate at 40℃ was measured to be %.

Note 4: Measure the pour point after adding 9.5% of the viscose to the HVIH5 base oil.



G6290V-V8-219 Benchmarking data

Analyze the projectQuality standardTypical resultAnalytical method
G6290VVisoplex V8-219
Kinematic viscosity(100℃)/m㎡/s800820GB/T265
Chromaticity/sign<0.5<0.5GB/T6540
Kinematic viscosity(40℃)m㎡/s50.7050.26GB/T265
Kinematic viscosity(100℃)m㎡/s9.199.14GB/T265
Viscosity index168165GB/T51995
Thickening capacity(m㎡/s)3.323.48NB/T265 note 1
KRL(20h,60℃)Shear stability index31.7232.27NB/SH/T0845 note 2
Tilt point℃-45-45GB/T3535 note 3

 

Note 1: The difference between the kinematic viscosity at 100°C and that of the base oil at 100°C after adding 9.5% viscosity index agent to the HVIH5 base oil.

Note 2: After adding 9.5% viscosity index to the HVIH5 base oil, measure its shear index.

Note 3: Measure the pour point after adding 9.5% of the viscose to the HVIH5 base oil.


mobile