This product is made from high-quality ethylene propylene rubber as raw material and produced by advanced technology. The product features excellent shear stability, as well as good thickening capacity, thermal stability and a significant effect on improving the viscosity-temperature performance of oil products. It is a relatively ideal viscosity index improver.
Product advantages
It has outstanding thickening ability. With a relatively small addition amount, an ideal thickening effect can be achieved, thereby enhancing the cost performance.
2. It has excellent shear stability, that is, the SSI value is less than 20, which can ensure the long-term operation requirements of the engine.
3. It has better viscosity-temperature performance and can maintain stable viscosity under different temperature conditions.
4. It has a more outstanding high-temperature and high-shear viscosity, which can meet the lubrication requirements of the engine under high-temperature conditions.
5. It features excellent low-temperature starting performance and high-temperature cleaning performance, and can maintain good performance under various extreme conditions.
6. It has better thermal oxidation stability, can maintain stable performance under high-temperature conditions, and extend service life.
Product application
Viscosity index improvers are the main additives used in the preparation of multi-grade internal combustion engine oil, hydraulic oil and gear oil. Adding viscosity index improvers to lubricating oil can produce multi-grade oil with good low-temperature starting performance and appropriate viscosity at high temperatures, improve the performance of lubricating oil, enhance the grade of lubricating oil, extend the service life of lubricating oil, and make the oil suitable for all seasons.
Dosage reference
The recommended dosage of this product when preparing oil products is 1% to 10%.
Project | Quality indicators | Typical result | Analytical method |
---|---|---|---|
Color | ≤2.0 | 0.5 | GB/T6540 |
Flash point℃(Open one's mouth) | ≥180 | 210 | GB/T3536 |
Kinematic viscosity,100℃ m㎡/s | Report | 2010 | GB/T265 |
Shear stability | ≤20 | 17.3 | SH/T0103 |
Dry agent content,% | - | 15 | - |
Moisture,% | ≤0.05 | 0.006 | GB/T260 |
Mechanical impurities,% | ≤0.08 | 0.04 | GB/T511 |
Density(20℃)kg/m³ | Report | 840.5 | GB/T1884 |
*. Complies with DIN EN 61099-2020 standard